Filter
Top Products
Selecting DIGITAL OUT.
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes to the digital audio
output.
2
■ To set the DVD+VCR to match the capabilities of your audio system:
While in Stop mode, press
[SETUP].
1
Select a Dynamic Range
You can set the Dynamic Range as
follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
3
48
DIGITAL OUT
DYNAMIC
RANGE
BITSTREAM
OFF
DIGITAL OUT
DYNAMIC RANGE
BITSTREAM
✓
LPCM
DIGITAL OUT
DYNAMIC RANGE
FULL
3/4
2/4
1/4
OFF
✓
AUDIO SETUP