Filter
Top Products
63
If your TV is equipped with S-Video or Component Video inputs,
you can enjoy superior video quality when watching DVDs on your
DVD+VCR. The S-Video and Component Video connection
methods are for DVD playback ONLY. The TV tuner and VCR can
still be viewed through the RF or line inputs.
To activate your alternative (S-Video or Component) video
selection, follow the “Alt Video Out” instructions on page 33.
Keep in mind that you can choose either S-Video or Component,
but not both.
1 Connect S-VIDEO OUT to TV
Using an S-Video cable, connect the S-VIDEO OUT on the back
panel of your DVD+VCR to the S-Video Input on your TV.
2 Connect COMPONENT VIDEO OUT to TV
Using a component video cable, connect the COMPONENT
VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD+VCR to the
Component Video Input on your TV.
3 Connect Audio Out (DVD only)
Using RCA audio cables, connect the Left/Right Line Out jacks on
the back panel of your DVD/VCR to the Left/Right Audio Line In
jacks on your TV.
• When connecting your DVD+VCR to a TV with the S-Video or
Component Video Output, make sure that you use these Line
Out jacks.
• To activate your connection, see “Alt Video Out” on page 33.
S-Video/Component Video Connections (for DVD)
To S-Video Input on Your TV
To Component Video Input
on Your TV
To Left/Right Audio Inputs
on Your TV
1
3
2