Filter
Top Products
19
Connections Getting
Started
SetupBasic
Operations
Advanced
Features
Help
Chapter 4 Basic Operations
:: Basic Disc Playback
Playing a DVD, CD or VCD
Follow these steps to play a DVD, CD or VCD disc:
1 Turn on the TV.
2 Set the TV to the AV input connected to the DVD player.
3 Turn down the volume on your amplifier and then power it on.
4 Set the amplifier to the AV input connected to the DVD player.
5 Press the POWER button on the front panel of the DVD player.
6 Press OPEN/CLOSE on the remote control or front panel to open the disc drawer.
7 Place the disc in the drawer with the label side facing up and playback side facing down. If the disc has two sides, place the disc
with the desired label facing up.
8 Press OPEN/CLOSE again to close the disc drawer.
9 Press PLAY on the remote control or front panel. Many discs will load and begin playing automatically when the disc drawer
closes. If the DVD has a disc menu, or more than one title, the disc menu may appear; see Disc Menu Navigation below.
10 Adjust the volume of the player by pressing the VOL/CH button on the remote control, then using the left/right arrow keys.
• Do not push the disc tray when closing it. Always use the
OPEN/CLOSE button to close the disc tray.
• If the disc is scratched, dirty, or not encoded for Region 1, you
will receive an error message and the disc will not play.
• Always use the STOP button to stop playback of a disc before
powering off the player.
UG.book Page 19 Thursday, January 9, 2003 10:05 AM