Filter
Top Products
Programming a CD
7
Playing a CD
• Besides playing Audio CDs, the unit is
capable of playing AVI les and JPEG
les off of CDs.
1. Plug the unit into a standard 120V outlet,
and turn the power on by moving the
Power Switch into the ON position. If
the internal battery is charged, the unit
does not have to be plugged in.
2. Press the Open Button and load a
CD into the unit’s DVD-Drive. Close
the DVD Door, and the CD will start
automatically.
3. If the CD doesn’t start, switch the unit
to DVD Mode by pressing and holding
DVD/SD/USB Function Button.
4. Press the Play & Pause Buttons to play
and pause the CD.
5. Press the Previous & Next Buttons to
skip backwards and forwards through CD
tracks.
1. Insert a CD into the unit. See the
“Playing a CD” operation.
2. After the CD is inserted and loaded,
press the Program Button on the remote
control to display the Program Menu.
3. Use the Directional Buttons to move
through the sixteen different program
slots.
4. Highlight a slot and enter CD track
numbers using the Number Keypad on
the remote control. Repeat steps 3 and 4
until the desired tracks are programmed.
5. Highlight the “Play” button, on screen,
using the Directional Buttons, and press
the Enter Button to begin playing the
programmed tracks.
T R K 1 8/ 1 8 0 1 : 1 4 :2 0
PROG
PLAY CLEAR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
T R K 1 8/ 1 8 0 1 : 1 4 :2 0
DVD
TITLE
PREV.
SETUP
AUDIO
NEXT
DISPLAY
DVD/SD/USBPLAY/PAUSE
VOLUME
TFT
ON/OFF
OPEN