Filter
Top Products
LF1600-INS-LAB-RevB07 • LF1600 Stand Assist 13
5 MAINTENANCE
To ensure safety and proper use, perform the following steps monthly:
• Check all fasteners to ensure that they are securely fastened and no wear and tear
is evident. Replace and tighten any worn fasteners before using the Stand Assist.
• Check the two seat assemblies to make sure they are not worn or damaged, and
that the bolts are tight. Replace any worn or damaged seat components before us-
ing the Stand Assist.
• Check the casters to make sure they are in working order and are secured rmly
to the Stand Assist. Replace any worn or damaged casters before using the Stand
Assist.
If any maintenance procedure is not clear to you, ask your Graham-Field Health Prod-
ucts dealer for assistance.
▲
Caution: Improper maintenance can cause operating problems and may affect
your warranty.
WARNING: Unauthorized modification or the use of non-Lumex replacement parts
could change the structure of the Stand Assist, void the warranty, and cre-
ate a hazardous condition resulting in serious personal injury.
CLEANING THE STAND ASSIST
Wipe off the frame at least once a week with a soft cloth. Dry the Stand Assist imme-
diately if exposed to moisture. Clean the frame every three months with a mild soap
and water solution. The frame does not need to be waxed. Do not use solvents, abra-
sive waxes, caustic chemicals or spray silicone. Never use abrasive cleansers; they
could scratch the nish. Never use steam or high pressure cleaners. Clean upholstery
and plastic components at least once a month with a mild soap and water solution.