Filter
Top Products
LF1600-INS-LAB-RevB07 • LF1600 Stand Assist 7
ASSEMBLY
Tools required: provided wrench, provided hex key
back casters
base assembly
1. Place the base assembly on the oor and lock the back casters for ease of assem-
bly, as shown above.
flat washer
lock washer
hex bolt
plastic
cap
kneepad
kneepad
support unit
kneepad
assembly
2. Insert the kneepads into the kneepad support unit. Install the two hex bolts
through lock washers, at washers, and kneepad support unit into nuts as shown
above. Tighten securely with the provided wrench. Install the two plastic caps on
the hex bolts. The nished assembly is shown at right above.