Filter
Top Products
ENGLISH
24
HOME NETWORK
------------------------------------------------------------------------------------------------------------
Network connection
You can establish a wired or wireless connection
between your television and the local network.
Wired network connection
1 Connect the output of external modem to
»LAN« socket with Cat 5 cable.
Note:
7
Connection cables are not supplied.
Wired network settings
There are two ways of making the wired network
settings.
A Automatic connection,
all data regarding the connection settings (»IP
Address«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
1 Open the menu with »MENU«.
2 Select »CONNECTED APPS« with »
V
« or »
Λ
«
and confirm with »OK«. Menu is displayed.
3 Select »Network Settings« with »
V
« or »
Λ
«
and confirm with »OK«.
– »NETWORK SETTINGS« menu is displayed.
4 Select »Connection« with »
V
« or »
Λ
« and
then select »Wired« with »
<
« or »
>
«.
5 Select »Connection Type« with »
V
« or »
Λ
«
and then select »Automatic« with »
<
« or »
>
«.
6 Select »Connect« with »
« (red) to establish
the modem connection.
– The mesage »Testing ... Please waite«
appears.