Grundig 32 VLE 8130 BL Flat Panel Television User Manual


 
75
ENGLISH
Creating lists of favourites
You can select your favourite channels and save
them in up to four favourites lists (Fav 1 to Fav 4).
1 In the »PROGRAME TABLE« menu, switch
over to the list view with »

« (yellow).
2
Select the preferred channel with »
V
«
or »
Λ
«.
3 Use »
<
« or »
>
« to ”push“ the channel into
one of the favourites lists 1 to 4 and press
»OK«
to confirm.
– The position in the favourites list is marked
with »«.
– You can enter the same channel in more
than one favourite list.
Each favourite list can store up to
255 channels.
Note:
7
Channels can also be deleted from favour-
ites lists. Select
the
channel to be deleted
with »
V
«, »
Λ
«, »
<
« or »
>
«
and delete it with
»OK«
.
Exiting the settings
1 Press »MENU« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Entering channel names (8 digit
maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with »
V
«, »
Λ
«, »
<
« or
»
>
« and press »
« (red) to confirm.
2 Open the input keyboard with »

« (green).
Note:
7
If necessary, delete the current channel
name. To do this, select the »
« button
with »
<
« or »
>
« and delete repeatedly using
»OK«
.
3 Select the required letters or numbers with
»
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»OK«
.
Repeat the entry for further letters/numbers.
Note:
7
Use the »ABC« button to switch to upper
case letters and use the »?@123« button to
switch to symbols and numbers.
4 Save the channel name by using »
V
«, »
Λ
«,
»
<
« or »
>
« to select »Submit« and confirm
with
»OK«
.
Note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be
skipped when you select with »
Λ
« or »
V
«.
Selection is still possible using the number
buttons.
1 In the »PROGRAME TABLE« menu, switch over
to the list view with »

« (yellow).
2 Select the preferred channel with »
V
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use
»OK«
to mark the channel.
– The channel is marked using »«.
Note:
7
Channels can also be reactivated. Select the
channel with »
V
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with
»OK«
.