Filter
Top Products
ENGLISH
60
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
Note:
7
Analogue channels can be selected if the
option »Air« or »Cable« has been selected.
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« with »
V
«
or »
Λ
« and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
V
« or
»
Λ
« and press »OK« to confirm.
– The »PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
V
«,
»
Λ
«, »
<
« or »
>
« and press »
« (red) to con-
firm.
2 Press »
« (yellow) to confirm the deletion
process.
Note:
7
»
« (blue) allows all television channels
to be deleted.
3 Press »
« (green) to confirm the deletion
process.
Entering channel names (8 digit
maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with »
V
«, »
Λ
«, »
<
« or
»
>
« and press »
« (red) to confirm.
2 Mark the television channel with »
«
(green).
3 Select the digits or letters with »
Λ
« or »
V
«
and use »
<
« or »
>
« for the next position, and
repeat the entry.
4 Save the channel name with »
« (green).
Note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be
skipped when you select with »
Λ
« or »
V
«.
Selection is still possible using the number
buttons.
1 In the »PROGRAME TABLE« menu, switch over
to the list view with »
« (yellow).
2 Select the preferred channel with »
V
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use »OK« to mark the channel.
– The channel is marked using »✔«.
Note:
7
Channels can also be reactivated. Select the
channel with »
V
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with »OK«.