Filter
Top Products
30
Setting television channels
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
3 Select »Installation« with »P+« or »P-« and confirm with
»OK«.
4 Select »Program no« with »P+« or »P-« and set the preset
channel with »
Ǹ
« or »
Ƿ
«.
5 Select »Search« with »P+« or »P-« and start the search with
»
Ǹ
« or »
Ƿ
«.
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with »
Ǹ
« or »
Ƿ
«.
6 Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Note:
To set other television stations, repeat steps 3 to 6.
7 Press »
i« to finish the setting.
SPECIAL SETTINGS
______________________________
Setup
Select Back
and open Exit
●
OK
AT S
Installation
Program table
Installation
Select Back
and edit Exit
System
Program no
Channel
Band
Search
Fine tuning
C
6
B/G
1
Store
Installation
Select Back
and edit Exit
Program no
System
Channel
Band
Search
Fine tuning
C
6
B/G
1
Store
●
OK