Filter
Top Products
ENGLISH
5
Mounting the table base
Diagrams are contained in the assembly instructions enclosed with the
table base.
1 Fasten the two brackets to the table base using the hex socket
screws supplied.
2 Remove four fixing screws for each bracket from the back of the
device.
3 Place the stand on a level surface.
4 Put the device on top of the stand.
5 Fasten the stand to the device by screwing four screws to the
back of the device for each bracket.
Connecting the loudspeakers
1 Use the speaker cable supplied to connect the »SPEAKER
OUT – +« terminals on the device to the »INPUT – +« termi-
nals on each speaker.
Connect the cables marked in red to the red terminal.
CONNECTION/PREPARATION
__________
7 W
INPUT
7 W
INPUT
L
YPbPr
A
udio in
L
DVI–D
SPEAKER OU
T
R
PC–IN