Filter
Top Products
14
Connecting an audio system with analogue
two-channel stereo sound
As an alternative to using the television’s speakers, the sound can
also be played back through an audio system. This can improve
audio playback.
1 Plug a standard cinch cable into the »AUDIO OUT L R«
socket of the DVD player and into the corresponding socket on
the audio system.
Caution:
Do not connect the »AUDIO OUT L R« socket on the DVD
player to the PHONO (record player) input socket on the audio
system.
Connecting the power cord
1 Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices.
Inserting batteries in the remote control
1 Open the battery compartment by pressing the snap-catch, and
remove the lid.
2 When inserting the batteries (Micro type, e.g. R06 or AA,
2 x1.5 V), observe the polarity marked on the battery compart-
ment.
3 Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used
batteries. The manufacturer accepts no liability for damage
resulting from used batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
CONNECTION AND PREPARATION
_
100-240 V~
50/60 Hz 10 W
S VIDEO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
EURO AV TV
S VIDEO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
100-240 V~
50/60 Hz 10 W
EURO AV TV
RL
AUDIO
INPUT