Filter
Top Products
12
Picture settings
1 Press »i« to open the »INFO« menu.
– The »INFO« menu appears.
2 Select »PICTURE« with »P+« or »P-« and confirm with »OK«.
– The »PICTURE« menu appears.
3 Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or
»SHARPNESS« with »P+« or »P-« and adjust them with »
Ǹ
«
or »
Ƿ
«.
Notes:
After a short while the »PICTURE« menu reappears.
The settings are saved as the »USER« picture default setting.
4 Press »
i« to finish the settings.
Audio settings
1 Press »i« to open the »INFO« menu.
– The »INFO« menu appears.
2 Select »SOUND« with »P+« or »P-« and confirm with »OK«.
– The »SOUND« menu appears.
Note:
Further operation is explained in the following sections.
Volume
The standard volume is set here. This is the volume of the device
after switching on.
1 Select »VOLUME« with »P+« or »P-« and adjust the setting
with »
Ǹ
« or »
Ƿ
«.
Balance
1 Select »BALANCE« with »P+« or »P-« and adjust the setting
with »
Ǹ
« or »
Ƿ
«.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual II «) and the
dubbed version on sound channel A (display: »DUAL I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »STEREO«).
You can switch the sound to »MONO« if the stereo reception
quality is poor.
1 Select »SOUND« with »P+« or »P-« and adjust the setting with
»
Ǹ
« or »
Ƿ
«.
SETTINGS
______________________________________________
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
SMART CONTROL USER
SELECT EXIT
AND EDIT
BACK
●
OK
SOUND
VOLUME
BALANCE
SOUND TYPE MONO
SOUND MODE NORMAL
EQUALIZER
SELECT EXIT
AND EDIT
BACK
●
OK