Filter
Top Products
14
Basic functions
Switching on and off
1 Switch on the television by pressing the »IO« button on the
television set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
2 Press the »
Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
3 Completely switch the television off by pressing »
IO« on the
television set.
– This saves electricity.
Selecting channels
1 Use »1…0« to select channels directly.
2 Press »P+« or »P-« to move up and down channels.
Selecting AV channel positions
1 Use »AV« to select AV channels directly.
Adjusting the volume
1 Adjust the volume with »
Ǹ
« or »
Ƿ
«.
Muting
1 Use »
p
« to switch the sound off (mute) and to switch it on
again.
Displaying time
1 You can display the time by pressing the »Ȅ« button (only for
channels with teletext).
Picture settings
You can select four different picture settings.
1 Select the desired picture setting from »USER«, »NATURAL«,
»RICH« or »SOFT« with »
z
«.
– You can alter the »USER« picture setting, see the ”Picture
settings” chapter on page 12.
Audio settings
You can select six different audio settings.
1 Select the desired sound setting from »USER 1«, »USER 2«,
»MUSIC«, »SPORT«, »CINEMA« or »SPEECH« with »
F
«.
– You can alter the »USER 1« and »USER 2« sound settings, see
the ”Equaliser” chapter on page 13.
TELEVISION OPERATION
___________________
Tele Pilot 160 C
VCR
DVD
SAT
z
TXT
PIP
AV
POS
SIZEPAP
SCAN
d