Filter
Top Products
12
Basic functions
Switching on and off
1 Switch on the television by pressing the »IO« button on the tele-
vision set.
– The device switches to standby mode.
Switch the television on with »1…0« or »P+« or »P-«.
2 Press the »
Ǽ« button to switch the television to standby mode.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
3 Completely switch the television off by pressing »IO« on the
television set.
– This saves electricity.
Selecting channels
1 Use »1…0« to select channels directly.
2 Press »P+« or »P-« to move up and down channels.
Selecting AV channels
1 Call up the »Source table« menu with »AV«.
2 Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3 Switch back to the television channel with »1…0«.
Adjusting the volume
1 Adjust the volume with »
Ǹ
« or »
Ƿ
«.
Muting
1 Use »
p
« to switch the sound off (mute) and to switch it on
again.
Displaying time
1 You can display the time by pressing the »Ȅ« button (only for
channels with teletext).
Displaying information
1 Press »-/--« to display the information.
– The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
frame of the current programme.
1 Press »
ǷǷ
« (yellow).
2 To quit this function, press »
ǷǷ
« again.
TELEVISION OPERATION
___________________
Tele Pilot 160 C
VCR
DVD
SAT
z
TXT
PIP
AV
POS
SIZEPAP
SCAN
d