Haier HL32ATB, HL26ATB Flat Panel Television User Manual


 
Switching On/Off the TV set
Choose the Menu Language
When you start using your set for the first time, you must select the language which will be used for displaying menus
and indications.
-In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an
example to help you with the TV operation.
Operation
-There are several options you might need to set up in order for your TV to work properly. Read the
instructions that follow.
Note:
If the TV in power on , the screen show information according the type of input signal . the information will disappear.
If there is no signal, the No signal will display on the left bottom of the screen.
1 Press the MENU button and then use / button to select the
Settings menu.
2 Press the button and then use / button to select Menu
Language.
3 Press the button and then use / button to enter the list of
available language. English Spanish or French
4 Select your language with the / button and press the OK
button to confirm you selection.
5 When you are satisfied with your choice, press the EXIT button
to return to normal viewing or press / MENU button to return to the
previous menu.
1. First, connect power cord correctly.
2. Select the viewing source by using INPUT button on the remote control.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
4. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Choose the Input Source
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are
connected to your TV.
1. Press MENU button and then use / button to select the Video menu.
2 Press the button and then use / button to select Select Source option.
3 Press the button and then use / button to select the available Source.
TV, CVBS,S-Video, YPbPr, HDMI, VGA,VGA-YPbPr
4. Press the OK button to confirm.
5 When you are satisfied with your choice, press the EXIT button
to return to normal viewing or press / MENU button to return to the
previous menu.
Operation
You can also press the INPUT button repeatedly to select the desired source.
Owner s Manual 15