Haier HL32ATB, HL26ATB Flat Panel Television User Manual


 
Settings Menu
Timer setting
The timer setting will only work if the TV set is turned on or in standby.
Switch on/off automatically at the time you presetting.
1 Press the MENU button and then use / button to select the Settings menu.
2 Press the button and then use / button to select the Timers.
3 Press the button and then use / button to select Timer.
4 Press the button to enter the Timer Setting menu.
5 Press / button to select the desired day.
6 Press the OK button to confirm, if to cancel the select, Press the OK button.
7 Press / button to select the Start Time or Stop Time, and press OK button
to enter the setting submenu.
8 Press / button to button move cursor.
9 Press / button or the digits button to setting the desired time.
10 When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
Operation
Sleep Timer Setting
The sleep timer automatically shuts off the TV after a preset time
(from 30 to 120 minutes).
1 Press the MENU button and then use / button to select the Time menu.
2 Press the button and then use / button to select the SleepTimer.
3 Press the button and then use / button to select the number of minutes.
Select OFF, 30Min, 60Min, 90Min, 120Min.
When the number of minutes you want is displayed on the screen, press the OK
button. The time begins to count down from the number of minutes selected.
4 When you are satisfied with your choice, press MENU button to return to
the previous menu or press the EXIT button to return to TV viewing.
5 To cancel the set sleep timer:
Press the / button to select OFF.
You can use the SLEEP button also to select quickly the sleep timer.
Owner s Manual 23
Note
1. Please aware of the Stop Time must follow with Start Time. The two settings
must be setting cooperatively.
2 .Please kindly be aware of the Timer Setting will take effective only after you
finish setting and shut off the TV. Then the system will start to final countdown.
Otherwise, the function will be ineffective.