Haier L20AV6-A0, L17L6A-G1 Flat Panel Television User Manual


 
5 Control Your TV
MENU
1
1
VOLUME 15
|||||||
-----------
-/--
2
1
3
4 5 6
7
8
9
0
5-1 Power On/Off
5-2
5-3
5-4
5-5
A blue indicator lights when the power is on and a red indicator
lights when in the standby mode.With Mains status On, you can
also turn off using Remote Control Hand Set. This status is called
Stand-By mode. In this mode, You can also turn ON.
The TV has an Automatic Power OFF function. With No Signal
condition, the TV will automatically turn OFF after 10 min.
Program Up/Down
Push [P+] key, to change Program Up
Push [P-] key, to change Program Down.
Direct Access Tuning
Using the numeric keys on Remote Control
Hand Piece, Channels can be selected
directly, for 0 to 199 channels.
Or repeatedly press the -/-- button, to
select the desired mode then press
numeric buttons.
- 1 digit mode
_ _ 2 digit mode
1_ _ digit mode (Max Ch. 199)
Each time after selecting a program, it will automatically turn back to one
digit mode, and press [-/--] to choose two or three digits before pressing
number keys [0]~[9]: the program digits.In the state of two digits entering,
the program will come back to the present one, only when the second number
is not entered within 3 seconds after the first number's entering. While in
three digits entering, the first digit will automatically be 1, and the program
will come back to the present one, only when the third number is not entered
within 3 seconds after the second number's entering.
Volume Control
MENU
Push [V+] key, for Volume Up
Push [V-] key, for Volume Down
the range is 0~100
Push [MENU] key continuously, to scroll through the MENU
selection, as follows.
PICTURE
SOUND
SETUP
TUNING
TIME
exit menu status
7