Filter
Top Products
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly
about the remote control.
Auto search
AUTO SEARCH
1.Press MENU button and CH+/- to select TV SETTING
(note: TV SETTING is only available in TV)
2.Press MENU button to
enter the TV SETTING and
CH+/- to select AUTO
SEARCH
3.Press MENU button to
enter the AUTO SEARCH.
Press CH+/- or VOL+/- to
select ON, and MENU to
confirm.The TV set will search
automatically all available
programs, after that, all
available program will be
stored in turn and the TV set
will return to the first channel
Note:The order of the automatic search is due to the frequency of the
program, generally speaking, it is used only at the first time you
search the program, and once the order of the program has been
confirmed, you don't have to use this function, otherwise the
order of the program will be changed.
IMAGE SETTING
TV SETTING
OSD SETTING
VIDEO ADVANCE
RESET
INPUT SOURCE
AUTO SEARCH
OFF ON
After searching
Press CH+/- button to check the channels.
If the sound is abnormal in a certain channel, it
may be the sound system has not been set properly,
so you should adjust it to the proper system (Reference to
. page 9)
SOUND SETTING
720 576 50HZ
CHANNEL
SOUND
SKIP THIS
AUTO FINE
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
OFF
ON
4
CH+
VOL- VOL+
CH-
MENU
CH+
VOL- VOL+
CH-