Filter
Top Products
About your LED LCD TV
Digital LED LCD Television Instruction Manual EN-10
En
Connecting Your TV
Antenna Connection
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
Improve Your Signal
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
Connect Your PC to the TV
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
Read your computer user guide and check it has a
VGA connector.
Connect a D type 15-pin VGA interface cable to the
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Turn on the power of the TV firstly and then the PC.
Press the button on the TV or TV remote control to
set the video input mode to PC.
Once the image shows, if there is noise present,
change the PC mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
Connect a DVD Player to Your TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, P
b, Pr) IN socket on your TV.
Turn on the DVD player and insert a DVD.
Press the SOURCE button to select COMPONENT
mode.
Refer to the DVD player user guide for operating
instructions.
DVD
Connect a DVD Player or VCR to Your
TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV and
them.
SCART Input
Connect the scart lead from the external device
(DVD player, Set-top box or games console) to the
TV scart socket.
Press the
SOURCE button to select SCART mode.
Press the
PLAY button on the external device.
HDMI Input
Connect the cable from the HDMI device to the TV
HDMI socket.
Press the
SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
operate.
Mount Your TV onto the Wall
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).