Filter
Top Products
RECORD
Using the features
EN-25 Digital LED LCD Television Instruction Manual
Press the button on the remote control to select the
adjusted item.
3
4
1 2
1. Play or pause
2Stop
3. Play previous
text
4. Play next text
Press EXIT button to return to the previous menu.
Using External USB
Disk For Recording
Note
The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
If you select all the size format for time shift, you
can not do any recording.
Only have to format when you use the device for
record for the first time.
Suggest the minimum device size for record is 1GB.
Bit rate:
Device bit-rate>5MB/s REC is safe .t
The system can not work normally if the USB
device have the listing problem below:
The device has bug.t
The device has error block.t
The device reports the unfaithful size.t
IMPORTANT
USB device should be format as FAT32 format byt
your PC before insert to the USB connector.
Time Shift
Insert the USB device with FAT32 format into the
USB connector.
Press PLAY/PAUSE button to start timeshifting .
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the STOP button.
Recording
Press RECORD button to record the program being
played, and
press EXIT button to make the recording
interface minimum.
5 five The streets of SAN Francisco (384MB)
[00:00:00/01:30]
14:52:52
Press STOP button to stop the program recording
being played.
For Playback the recorded program. Enter
USB to
Select the content you recorded.
Press OK button to play the program recorded and
press STOP button to stop it.
-00:00:08 14:30 15:00
/X