Filter
Top Products
23
English
2.3 Using the TV
2.3.1 Turning the TV On and Off
1 Press on the control panel or remote control. The power LED indicator on the
TV changes from amber to blue, indicating that the TV is on.
2 Press again. The power LED changes from blue to amber, indicating that
the TV is off.
2.3.2 Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search.
2.3.3 Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2 Select Auto scan, then Start option.
3 Press OK on the remote control to run the channel search.
2.3.4 Selecting Channels
•Press PS on the remote control or control panel to increase the channel number.
•Press PT on the remote control or control panel to decrease the channel
number.
• Enter the specific channel number by pressing the number buttons on the remote
control.
2.3.5 Adjusting the Volume
1 Press VOL+ on the control panel or remote control to increase the volume.
2 Press VOL- on the control panel or remote panel to decrease the volume.
3 Press MUTE to eliminate sounds, and press MUTE again or press the volume
buttons to restore the original volume.