6
NOTE 3:
In order to view programmable settings on PT-VIDEO monitor, you
must use adaptor cables provided to connect MDVR video out to number
2, 3 or 4 camera inputs on the monitor.
(Cannot connect to camera 1 input.).
*** If you have a four-camera system (PT-VIDEO-4) you must
temporarily disconnect one of the cameras and attach the MDVR video
out cable in order to view the recorder settings and data. After MDVR
settings are confirmed, the camera must be reconnected.
(Leave this camera cable accessible for future MDVR programming)
The MDVR Data will not be viewable on cab monitor, but it will be
recorded and viewable when downloaded onto main computer system.
MDVR
PT-VIDEO Monitor
Optional GPS
Main
MDVR
Harness
RCA to RCA Harness
# GSM70024
MDVR Video out to
Monitor adaptor cable
# GSM70026
Camera input connectors
Monitor
Main
Harness