Filter
Top Products
2
Probing
Introduction This chapter contains a description of the probing system of the
HP 16510B logic analyzer. It also contains the information you need to
connect the probe system components to each other, to the logic analyzer,
andtothesystemundertest.
Probing
Options
You can connect the HP 16510B logic analyzers to your system under test
in one of four ways:
• HP 10320C User-definable Interface (optional)
• HP 10269C with microprocessor specific modules (optional)
• the standard HP 16510B probes (general purpose probing)
• direct connection to a 20-pin 3M
Series type header connector
using the optional termination adapter (HP Part No. 01650-63201).
The optional HP 10320C User-definable Interface module combined with
the HP 10269C General Purpose Probe Interface (optional) allows you to
connect the HP 16510B logic analyzer to your target system. The HP
10320C includes a breadboard (HP 64651B) which you custom wire for
your system.
Also available as an option that you can use with the HP 10320C is the HP
10321A Microprocessor Interface Kit. This kit includes sockets, bypass
capacitors, a fuse for power distribution, and wire-wrap headers to
simplify wiring of your interface when you need active devices to support
the connection requirements of your system.
HP 16510B Probing
Front-panel Reference 2 - 1