Filter
Top Products
Using the TV features
Basic Operations
Multimedia - TV receiver, Video monitor and PC display, all in one
Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel
Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective
of magnetic or geomagnetic effect
200 channels storage
Sleep timer
Teletext with 252 pages memory
NICAM/A2
Dual SCART interface
Multi-language OSD
Understanding the TV features
Power ON/OFF
- 7 -
POWER BUTTON
(STANDBY)
POWER
INDICATOR
Signal source selection
Select channels by [CH+/CH-]
You can also use[CH+ / CH-] to select channels. ndicates channel number increase; indicates channel
number decrease.
[CH+] i [CH-]
Press the [CH+/CH- ] button to select TV input; press the [VIDEO] button to select SCART1 input or SCART2
input(from SCART2); press the [S-VIDEO] button to select S-VIDEO input;press the [ YPbPr] button to select
YPBPR/YCBCR input; press the [PC] button to select PC input(When you press the PC button first, you can enter
the VGA mode, when you press the PC button again, you can enter the DVI mode).
NOTE: When you press the [ YCbCr ] button, the ABORT KEY will be displayed on the screen, and this
button has no use in this TV.
1) Connect the TV to power outlet and switch on the AC power switch. If the power
indicator is red, it means that the TV is off. You need to press the Power button
2) Press the Power button on the front control or on the remote control to turn off
the TV temporarily.
3) Always release the AC power switch or remove the AC power plug from the
outlet when not using for a long period of time.
on the front control or on the remote control to turn on the TV, and the power
indicator will turn blue. Several seconds later, TV picture will display on the
screen.