3.Switching on/off
1) Connect the TV to power outlet. The power indicator will glow in red color. Press the power switch or the POWER
button on the remote control to turn on the TV.
2) Press the power switch or the POWER button on the remote control to turn off the TV.
4.Signal source selection
Press the TV/AV button to select TV or AV mode.
5.Air/Cable selection
You can select the signal receiving method according to the following steps:
1) Press the MENU button repeatedly until the PRESET menu appears as
shown in the right .
2) Press the CH+ or CH- button to select the item Antenna.
3) Press the VOL+ or VOL- to change the item between Air and Cable.
Position
17
PRESET
Add/Delete
Antenna
Auto-search
Add
Air
Select
:
Adjust
:
6.Channel search
1) Press the MENU button repeatedly until the PRESET menu appears as
shown in the right.
2) Press the CH+ or CH- button to select the item Auto-search.
3) Press the VOL+ or VOL- to start to auto-search programs.
Position
17
PRESET
Add/Delete
Antenna
Auto-search
Add
Air
Select
:
Adjust
:
7.Picture adjustment
1) Press the MENU button, and the PICTURE menu appears as shown in the right.
2) Press the CH+ or CH- to select the item you want to adjust.
3) Press the VOL+ or VOL- to adjust the level .
Bright
80
PICTURE
Contrast
Color
Sharp
Tint
80
00
80
80
Select
:
Adjust
:
8.Sound adjustment
1) Press the MENU button repeatedly until AUDIO menu appears as shown right .
2) Press the CH+ or CH- to select the item you want to adjust.
3) Press the VOL+ or VOL- to adjust the item.
Volume
50
AUDIO
Balance
00
Select
:
Adjust
:
9.Timer setting
1) Press the MENU button repeatedly until the CLOCK menu appears as
shown in the right.
2) Press the CH+ or CH- to select the item you want to set.
3) Press VOL+ to set hour and press VOL- to set minute.
Time
CLOCK
On-time
Off-time
Attention
Exchange
Select
:
Adjust
:
Position
:
:
:
:
:
Note2: For more detailed information, please refer to the manual. owner's
Note1: All keys mentioned above are on the remote control unless indicated otherwise..
-4-