Filter
Top Products
To enjoy the programs coming from your audiovisual equipments such as VCR, DVD, Satellite receiver, Camcorder,
Audio amplifier and etc, the signal must be received by the set via the AV input terminals at rear. You can also record
the TV programs to a video tape by VCR. Connect the devices as the following figure.
Note:
1.The program coming through AV input terminals can't be re-recorded via AV output terminals.
2.When the TV is in AV mode, there is no signal output on the OUTPUT terminals.
3.When connecting S-VIDEO, Audio Left and Right cables should be connected to AUDIO INPUT terminals.
Also the S-VIDEO and VIDEO INPUT terminals can't be connected simultaneously. When you want to watch
TV program, please shut the S-VIDEO signal.
Connecting the audiovisual equipments
Connecting your TV
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied).
Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The
exact type and location of the aerial will depend on your particular area. Consult your local dealer or service
personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed.
Connect the equipments as the following figure.
-6-
AERIAL SOCKET
REAR VIEW
TWIN-LEAD FEEDER ¦¸(300 )
Loosen the screw
Insert the feeder in
Tighten the screw
Plug(not supplied)
Adaptor (not supplied)
The signal comes from:
! An outdoor aerial
! An indoor aerial
Connecting the aerial
To the input terminals
PLAY VIDEO TAPE, DVD etc.
INPUT
OUTPUT
VIDEO
VIDEO
LEFT(MONO)
LEFT(MONO)
RIGHT
RIGHT
VCR/DVD
RECORD THE TV PROGRAM
From the output terminals
INPUT
L(MONO)
RR
OUTPUT
VIDEO
VIDEO
L(MONO)
S-VIDEO
TV
AUDIO
S-VIDEOS-VIDEO
COAXIAL CABLE(75¦¸)