Filter
Top Products
AIR/CABLE
23
AIR/CABLE
Your TV/VCR Combination can receive 125 cable antenna (CATV) channels, or
12 VHF channels and 56 UHF AIR channels. (See RECEPTION BAND
TABLE). When shipped from the factory, it is set to AIR (VHF and UHF). To
receive CATV channels, please operate as follows.
Remote Control Buttons
• CATV CHANNEL SELECTION
1. Press the MENU button.
2. Press the "1" key.
3. Press the "2" key.
4. Press the "1" key.
5. Select "CATV1" or "CATV2" by using "1" key.
6. Press MENU button.
The TV screen will return to the INITIAL SETTING screen.
Note:
1. If the reception of certain CATV channels is poor or not possible in the "CATV1"
mode, select "CATV2".
2. If the special channel frequencies that are known as the HRC (Harmonically
Related Carrier) system are used with your cable system, select "CATV2".