Filter
Top Products
16
5.3 Initialization
This model has a Initialization Mode, where the technician can initial the EEPROM.
Preliminary
1.To access the Bebbug Mode, the TV must be
running.
Procedure
① ②
6. Press and hold the #4 and #5 button (VOLUMES and VOLUME
T).
7. While continuing to hold the #4 and #5 button, press and hold the #1 button (SUB-POWER).
8. After both buttons have been held down for five (5) seconds, first release the #1 button, then release the
#4 and #5 button.
9. As stated previously, the input that the TV had selected at the time will determine which actual
INITIALIZATION display will show up. (See below)
Downloaded From TV-Manual.com Manuals