Filter
Top Products
3
WARNING
Follow instructions. Must use same types of wires and components.
The cabinet, chassis, and labels are parts
that require attention. You must follow the
caution notes and safety instructions
presented throughout this User Manual to
prevent damage to them or injury to
yourself.
Prevent electric shock.
The TV uses special tubes and tapes
made from insulated materials. Moreover,
some materials are kept from making
contact with the PWB for the sake of
safety.Internal leads are kept from hot
parts or high voltage parts by means of
clamps or other measures. As such, you
must restored these parts to their original
conditions in order to prevent electric
shock or fire.
Perform safety check when done.
Exercise caution while working on the
device as the TV contains high voltage
parts and
supply.It is possible to sustain severe
injury or death if you accidentally touch
the wrong parts.You must disconnect the
power supply while servicing,
reassembling, or change parts. If you
touch a live connection it is possible to
sustain severe injury or death.
Use recommended components.
Every part (such as removed screws,
components, and wiring) must be
restored to their prior conditions after
servicing.Be sure to check everything that
was repaired for damage or mistakes.
Also measure the insulated impedance
with a meg-ohm meter to confirm that the
impedance value is more than 4M ohm.If
the impedance value is less than 4M
ohm, then electric shock or fire may
result.
Use only the recommended components
or componentst that structurally identical
to the originals. This is to ensure safety
and reliability. Pay special attention to
parts in the parts list and circuit diagrams
marked with
. If you use
non-recommended components, then
electric shock or fire may result.
Downloaded From TV-Manual.com Manuals