Filter
Top Products
9
5.Adjustment
5.1 SERVICE (FACTORY) MODE ACCESS
This model has a Factory Mode, where the technician can access and adjust some of the color temperature
settings. The Factory Mode has several different appearances, depending on the input signal.
Picture Setting
for Factory Model
NTSC
Table1 TV
Table2 AV (composite)/SV(S-Video)
Table3 SV(S-video)
Table4 480i(component)
Table5 480p(component)
Table6 1080i/60(component)
Table7 720P/60(component)
Picture Setting
for Factory Model
PAL
Table1 TV
Table2 AV (composite)/SV(S-Video)
Table3 SV(S-video)
Table4 576i(component)
Table5 576p(component)
Table6 1080i/50(component)
Table7 720P/50(component)
Preliminary
1. To access the Factory Mode, the TV must be
running.
Procedure
2. Press and hold the #3 and #4 button (PROGRAM
T and VOLUMES). ① ②
3. While continuing to hold the #3 and #4 button, press and hold the #1 button (SUB-POWER).
4. After both buttons have been held down for five (5) seconds, first release the #1 button, then release the
#3 and #4 button.
5. As stated previously, the input that the TV had selected at the time will determine which actual FACTORY
MODE display will show up. (See next page)
Downloaded From TV-Manual.com Manuals