Filter
Top Products
HOOK-UP CABLES AND CONNECTORS
13
HOOK-UP CABLES AND CONNECTORS
Most video /audio connections between components can be made with shielded video
and audio cables that have phono connectors. For best performance, video cables
should use 75-ohm coaxial shielded wire. Cables can be purchased from most stores
that sell audio/video products. Below are illustrations and names of common
connectors.
Before purchasing any cables, be sure of the output and input connector types required
by the various components. Also make sure how long the cables should be.
300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an antenna adaptor (300-Ohm to 75-
Ohm).
Phono Connector
Used on all standard video and audio cables which connect to inputs and outputs
located on the Television's front and rear jack panels.
"F" Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the antenna jack on the television.
S-Video (Super Video) Connector
This connector is used on all camcorders, VCR's and laser disc players with an S-Video
feature in place of the standard video cable to produce a high-quality picture.
TIPS ON REAR PANEL CONNECTIONS