Filter
Top Products
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
42
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
TRANSMITTER BATTERY INSTALLATION AND REPLACEMENT
Open the battery cover of the Remote transmitter by pushing the notched part of the
cover with your finger.
a) Push the batteries towards the spring and lift them out.
b) Replace old batteries with two new "AA" size (SUM-3) batteries or equivalent.
c) Match the (+) and (-) marks in the battery compartment.
d) Replace the cover.
CAUTIONS
1. If your television set is to remain unused for a long period of time, for instance, when you
go on a vacation, unplug the television set from the wall outlet.
2. Do not subject the Remote transmitter to shocks such as dropping it on the floor, etc.
Precision parts may be damaged.
3. Do not allow the Remote transmitter to become wet and avoid placing it in areas of high
humidity. Don't leave it on or near a heater. Excess heat or moisture may cause the unit to
cease operation.
4. If the batteries become exhausted, Remote control operation may become erratic or stop
altogether. Replace the old batteries with two fresh "AA" (SUM-3) types.
NOTES
1. When the power button is set to OFF, the OFF TIMER is released.
2. The channel No. indication, volume indication and OFF TIMER indication are not
displayed simultaneously.
3. To operate your TV, point the Remote transmitter at the remote sensor of the TV.