Filter
Top Products
-SET UP- FUNCTIONS
23
-SET UP- FUNCTIONS
Press MENU, 1, and ENTER to display 3 of the -SET UP- Functions. There are a total
of 8 -SET UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the number
buttons to highlight a function. The functions in purple can be selected by pressing
ENTER. To exit the on-screen display, press MENU or RECALL.
NOTE: The MULTI-PAGE SELECT SWITCH must be set to "TV" mode to use the number
keypad. Selecting a function may be easier by using the CURSOR UP and DOWN buttons
with the MENU and ENTER buttons.
To see an autodemonstration of the on-screen display and to practice using the remote
control, press and hold the POWER button on the TV set for approximately 5 seconds.
Press the POWER button on the TV again to end the autodemonstration.
• CLOSED CAPTION
When CLOSED CAPTION is highlighted in purple, press ENTER to see the following
display:
Closed captions are the dialogue, narration, and/or sound effects of a television
program or home video which are displayed on the TV screen. Your local TV program
guide denotes these programs as
.
DISPLAY: ON/OFF is to turn the
display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV program guide.
This information covers the entire screen and viewing the TV program is not possible.
TEXT may not be available with every program.
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language (may vary by region).