Filter
Top Products
9
ENGLISH
Location of controls
Description of Indicators and Controls
1. (SUB-POWER) button: To turn the unit standby mode on and off.
2. INPUT-button: Select input mode for TV/AV/COMPONENT/HDMI/PC.
3. MENU-button: To display the menu-screen.
4. VOLUME
▲/▼ buttons : To adjust the volume. In Menu : Setting.
5. PROGRAM ▲/▼ buttons: Press ▲ to change to a higher numbered channel set into memory. Press
▼ to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning
on the unit.
6. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
7. AV3-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
8. Main Power Switch: To turn the unit on or off completely.
9. Loudspeakers
10. Remote sensor
11. STANDBY/ON mode indicator: It lights up in red at STANDBY, and in green at POWER ON.
Approx. 6˚
Approx. 2˚
Right Side
You can adjust the angle of
the TV-screen for 2˚ forward
or for 6˚ backward from
vertical angle.
Front Side
Left Side
2
34
5
7
9
8
1
Top
11
10
6
3V90441A [E] P09-12 31/10/05, 9:21 AM9
32LD380T
A
HITACHI