Filter
Top Products
35
ENGLISH
OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)
Selected characters Setup hint
Select the channel entry method between position setting or direct
setting. And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199
and AV00).
• If [Direct] is selected, the screen display will be C✱✱ at the chan-
nel 0~99 and S✱✱ at the channel 100~199.
Press the OK button and it starts the auto tuning.
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by and
SELECT buttons and move to next digit by ADJUST button.
Press the OK button again after finished.
• Selectable letters are “0”~”9”, ”A”~”Z”, “+”, “–”, ” ”(blank),
”,”(comma) and ”.”(period) .
• If [Position] has been selected, search the frequency here by
pressing and buttons.
• If [Direct] has been selected, this function will be not available
(grayed out).
Select the sound system through the 5 different settings.
Select the color system through the 5 different settings.
If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
If this is set to On, that position will be skipped while selecting posi-
tions by CHANNEL UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
After completing the fine-tuning, press the RETURN button to exit
this mode.
• The variable range is -56 ~ +56.
Select the teletext language through the 4 settings.
• Select West Europe when watch in Singapore, Australia, Malaysia,
and so on.
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the
list by pressing and SELECT buttons. And press OK button
to complete it. Press the RETURN button to exit.
If this is set to On, it helps to reduce the noise interference visible on
the screen in case of strong airwave.
Set the position number(0~199) or channel number(C✱✱, S✱✱) by
(+) (–) CHANNEL UP/DOWN buttons.
Auto Tuning
Search
Manual Tuning
Position
Frequency
Name
Sound System
Color System
Skip
NR
Antenna Att.
Fine Tuning
Sort
Increasing the frequency data
for the main tuner.
Decreasing the frequency
data for the main tuner
––
––
––
––
––
(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
(A Line of position List)
Teletext Language
Auto Off
Mode
Position Direct
( :a letter)
Auto M BG
DK I
Auto PAL SECAM
NTSC3.58 NTSC4.43
Off On
Off On
Off On
Off On