Hitachi 42HDT79 Flat Panel Television User Manual


 
27
The Remote Control
How to Use the Remote to Control Your TV
16:9 STANDARD 2
Use this aspect mode to display 16:9 sources like
HDTV and DVD’s preserving the original 16:9
aspect ratio showing 100% of the size.
ASPECT button
Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal format
received, the picture format ratio allows you to adjust the images through the following options.
Antenna-Analog Channel
S-Video/Video Input
(Auto Aspect: Off)
HDMI-480i/480p Input
(Auto Aspect: Off)
Component-480i/480p
Input (Auto Aspect: Off)
Note: Please see Appendix A
on page 98.
Antenna-Digital Channel (4:3)
S-Video/Video 4:3/Letter
Input (Auto Aspect: On)
HDMI-480i/480p 4:3/
Letter Input (Auto Aspect: On)
Component-480i/480p 4:3/
Letter Input
(Auto Aspect: On)
Note: Please see Appendix A
on page 98.
S-Video/Video 16:9 Input
(Auto Aspect: On)
HDMI-480i/480p 16:9 Input
(Auto Aspect: On)
Component-480i/480p
16:9 Input
(Auto Aspect: On)
Note: Please see Appendix A
on page 98.
Antenna-Digital Channel (16:9)
HDMI-720p/1080i Input
Component-720p/1080i
Input
Note: Please see Appendix A
on page 98.
NOTE: 1. The Aspect Stylein all five video inputs have independent Aspect Style setting.
2. Vertical position adjustments are directly available when you choose 4:3
EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM aspect style (see also page 50)..
4:3 STANDARD
Use this aspect mode to display conventional (4:3)
images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original
aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent
uneven aging of the phosphors. Phosphors in the
lighted area of the picture will age more rapidly
than the gray areas.
4:3 EXPANDED
Use this aspect mode to display conventional (4:3)
sources by linearly increasing image expansion
from the center towards the edges of the display
area in order to fill it.
4:3 ZOOM1/ZOOM2
Use these aspect modes to zoom in on
conventional (4:3) sources.
16:9 STANDARD 1
Use this aspect mode to display 16:9 sources like
HDTV and DVD’s preserving the original 16:9
aspect ratio showing 95% of the size.
16:9 ZOOM
Use this aspect to Zoom-in once while in 16:9
aspect.
3. When displaying 16:9 STANDARD 2 it may appear lines at the edge of the picture
this is normal operation of the TV.
1
1
IMAGE INPUT
IMAGE INPUT
IMAGE INPUT
IMAGE INPUT
1
2
IEEE1394 (16:9) (Only HDX models)
IEEE1394 (4:3) (Only HDX models)