Hitachi 42HDT79 Flat Panel Television User Manual


 
On-Screen Display
Video
Reset Video Settings
Video
Move
SEL Return
Select “Reset” to return the video menu settings
on this Input to the original factory settings.
Reset
OR
Reset Video Settings
Black Side Panel
Aspect
White Balance
Auto Color
Color Decoding
Color Management
Auto Movie Mode
Noise Reduction Low
O
O
O
Video
Move
SEL Select
OR
Auto Aspect : On
Mode 16:9 Standard1
Vertical Position : 0
Aspect
Video
Move
SEL Return
OR
Aspect
Use this function to select the Picture Format Aspect
Ratio.
Auto Aspect
Automatically adjust the Aspect Ratio depending on
the input signal to fill the screen.
Mode
Manually select the Aspect Ratio.
Vertical Position
This function allows you to select when aspect style is
either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9
ZOOM. Vertical position can be changed with these modes. For example, it will be useful for centering the
picture area at both the top and bottom of the picture with 480i/480p signal. Adjustable range is -10 (video
center is toward bottom of screen) to +10 (video is toward top of screen).
1. Use the CURSOR PAD
̆ or ̄ to to select menu item.
2. Press the CURSOR PAD
̇ or ̈ to adjust the function.
3. Press the EXIT to quit the MENU, or select ASPECT to return to the main menu.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Reset Video Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day-Dynamic
VIDEO mode.
1. Use CURSOR PAD ̆, ̄ or CHANNEL WHEEL
buttons to highlight functions.
2. Press the SELECT button or CURSOR PAD ̈ to
select Reset Video Settings.
3. Use the CURSOR PAD ̄ to access at the Reset
softkey.
4. Press the SELECT button to Reset the Video
Settings.
You can customize each of the Video Inputs to your
preference to increase viewing performance and
pleasure, depending upon the video program being
viewed. If RESET is selected, only the selected Input will
reset to the initial conditions as explained above.
If RESET is selected in Input 1, only Input 1 will return to
factory conditions.
50