Filter
Top Products
THE REMOTE CONTROL (CLU-415UI) - 17 -
* See page 10 for location of Surround Switch.
THE REMOTE CONTROL (CLU-415UI)
In addition to controlling all the functions on your HITACHI Projection TV, the new
remote is designed to operate different types of VCR's and different types of CATV
(Cable TV) converters with one touch. Basic operation keys are grouped together in one
area.
To operate your TV, point the remote at the remote sensor of the TV, and press the TV
button on the remote. The remote will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR, and press the
VCR button. The remote will now control your VCR.
To operate your Cable Box, point the remote at the remote sensor of the Cable Box,
and press the CABLE button on the remote. The remote will now control your Cable
Box.
Click to see the Remote
These buttons allow the remote to control your TV, VCR, or Cable Box depending of
which mode is chosen, as explained above.
, LIGHT BUTTON
When you are in a dark room, press this button on the side of the remote to light up the
buttons shown in . The light will stay on for about 8 seconds if the light button is not
pressed again. These buttons will not appear to light if the room is too bright.
PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded VCR codes.
TV/VCR BUTTON
When the remote is in the TV or VCR mode, this is the TV/VCR button. When the
remote is in the CABLE mode, this is the A/B button.
HOW TO USE THE REMOTE TO CONTROL YOUR TV
Click to see Remote
POWER button