Filter
Top Products
HOW TO USE THE REMOTE TO CONTROL YOUR TV - 18 -
Press this button to turn the TV set on or off. If MESSAGE-1 OR MESSAGE-2 is set, it
will be displayed when the TV is first turned on. (See page 32.)
RECALL button
When you want to check the channel being received, or if it has a stereo (ST) or second
audio program (SAP), press the RECALL button.
You can also check the time, and if the ON TIME or OFF TIME has been set. (See page
31.)
You can also use the RECALL button to quickly clear many of the other on-screen
displays.
MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc..
CHANNEL SELECTOR buttons
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc.
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. For
channels 100 and higher, press the"1" button, wait until another dash appears next to
the channel display on your TV, then enter the remaining two numbers using the
number buttons.
Channel selection may also be performed by pressing channel up ( ) or down ( ).