Filter
Top Products
SETUP
62
ON-SCREEN DISPLAY
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Use THUMB STICK ̆ , ̄, ̇, ̈ then press down on THUMB STICK to change AUTO LINK setting.
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is con-
venient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu.
Video 2 Auto Link
NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2. When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
THUMB
STICK
SELECT
Move
SEL
Return
Set The Inputs
Setup
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR2 VCR
CAM DVD2 SAT VCR2
CBL LD STB
CBL2 PVR STB2 Reset
Auto Remote Off
Rename List
Video Power Save
Auto Link
Move
SEL
Return
Set The Inputs
Setup
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR2 VCR
CAM DVD2 SAT VCR2
CBL LD STB
CBL2 PVR STB2 Reset
Auto Remote Off
Rename List
Video Power Save
Auto Link
Set The Color System
Set Black Side Panel
This function allows you to automatically change tint and color coordinates for DTV programs.
AUTO - Automatically determines the color system for the input signal.
HDTV - High Definition Television - Use for High Definition Signal Y-P
B
P
R
from HDTV Set-Top
Box.
SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-C
B
C
R
.
NOTES: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be
abnormal.
2. All component color system settings will affect only color component input you are currently viewing. If you are using
both sets of component input jacks, be sure to set the color system feature for both inputs.
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
When the Plasma Television is powered OFF, BLACK SIDE PANEL feature will be set to OFF
automatically when the TV is powered ON. BLACK SIDE PANEL feature needs to be set every
time the TV is turned ON.
The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
NOTE: To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.