Hitachi 51F59A Projection Television User Manual


 
Audio Video
VCR
OUTPUT
Your HITACHI Projection TV incorporates one Tuner
technology designed for improved viewing enjoyment.
This Tuner feature allows you to view antenna input
on the main picture and a Video Input on sub-picture
simultaneously.
When an ANALOG channel or INPUT is viewed as
the main picture, an ANALOG channel or INPUT can
not be viewed as a sub picture.
To select between main picture and PIP sub-picture
use the CURSOR buttons on the remote. The green
highlighted channel display will move with every
press of the CURSOR buttons (
̇ or ̈).
The Picture-in-Picture feature is convenient when you
want to watch more than one program at the same time.
You can watch a TV program while viewing other
programs from any of the video inputs.
Use the connection diagram to the right to view VCR
program as a sub-picture while viewing another program
as main picture (CABLE or AIR). You may also view the
VCR program as a main picture while viewing another
program as a sub-picture (CABLE or AIR).
³ PIP button
Press the PIP button and a sub-picture will appear in one of the four
different modes (POP, PIP or SPLIT ), depending on the INPUT
signal. To change the PIP mode, use the PIP button to cycle through
the four different modes.
POP Mode Picture-in-Picture
POP MODE PIP displays the sub-picture outside of the main picture.
Use the CURSOR buttons (
̆ or ̄) to move the sub-picture. This
feature is not available with a 480p,720p and 1080i signal.
Please refer to the Picture-in-Picture Modes Table (see page 26 & 27).
NOTE: 1. Press the CURSOR buttons (
̇ or ̈) to enable the
sub-picture sound.
2
. Two INPUTS cannot be viewed simultaneously in
PIP MODE. Only one INPUT (1-5) and one antenna
(CABLE OR AIR).
PIP
MAIN PICTURE
MAIN PICTURE
SUB
SUB
PICTURE
PICTURE
23
Picture-in-Picture (PIP)
The Remote Control
³
·