Filter
Top Products
30
G
U
I
D
E
A/
V NET
THE REMOTE CONTROL
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TV
ቧ ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
area of the picture will age more rapidly than the gray areas.
4:3 EXPANDED Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
the center towards the edges of the display area in order to fill it.
4:3 Zoom1/Zoom2 Use these aspect modes to zoom in on conventional (4:3) sources.
16:9 STANDARD Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect
ratio.
16:9 Zoom Use this aspect to Zoom-in once while in 16:9 aspect.
(1) Antenna Analog Channels
(2) 480P Input
(3) 720P/1080i Input
4:3
INPUT
4:3 EXPANDED
4:3 ZOOM1
4:3 ZOOM2
16:9 STANDARD
4:3 STANDARD
INPUT
16:9
16:9 STANDARD 16:9 ZOOM
16:9 ZOOM
4:3 EXPANDED
4:3
INPUT
4:3 EXPANDED
4:3 ZOOM1
4:3 ZOOM2
4:3 STANDARD
(4) RGB (Analog Input) ASPECT DISPLAY MODE.
Others SVGA/XGA(4) VGA 480p 720p 1080i
X REAL REAL REAL(1) X X
NORMAL NORMAL NORMAL NORMAL(1) X X
FULL FULL FULL FULL(1) FULL(2,3) FULL(2,3)
ASPECT
MODE
AVAILABILITY
RGB (Analog) INPUT SIGNAL
For numbers in ( ), please see corresponding note below.
NOTES: 1. Lack of raster can be seen in RGB (Analog) when a 480p signal is input.
2. AUTO ADJUST function (see page 87) is not available in 720p and 1080i input signal.
3. FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).
4. Depending on the Aspect selection, Closed Caption display may be missing.