Filter
Top Products
PICTURE-IN-PICTURE (PIP) - 18 -
Recall Illustration
13 MENU, CURSOR buttons
All the On-Screen Display features can be set or adjusted by using these buttons.
The MENU button will start the On-Screen Display.
The CURSOR buttons will highlight functions or adjust and set different features.
14 CHANNEL SKIP
Press this button when no menu is displayed and the TV will tune to the last channel viewed. The user
can change channels "SURF" to any station they wish, and after 90 seconds, tune back to the original
channel.
15 SLEEP button
Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press
of this button will add 15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL
when you want to view time remaining (some models only). If the SLEEP button is pressed while the
timer is set, it will reset to the original condition.
16 INPUT button
The INPUT button will select between both antenna signals and the three sets of video input jacks each
time the button is pressed. If the Picture-in-Picture is on, the INPUT button will select between the three
sets of video input jacks and both antenna sources when main channel is chosen with the PIP CH
button. If the sub-picture is chosen, the INPUT button will select between the three sets of video input
jacks and the ANT A antenna source (ANT B source cannot be displayed as a PIP sub-picture and
COMPONENT: Y-CbCr Input 2 source will be displayed as a blank PIP Sub picture.)
Input Illustration
PICTURE-IN-PICTURE (PIP)
Your Hitachi Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This
Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously,
with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs
(ANT A and ANT B).
ANT A input can be viewed as both the main picture and sub-picture simultaneously. ANT B and COMPONENT
Y-CbCr input 2 sources can only be viewed as a main picture. To select between main picture and PIP sub-
picture tuning, press the PIP CH button on the remote. The blue highlight on the channel display will move with
every press of the PIP CH button. When the blue highlight is on the top channel display, channel tuning is for the
main picture. When the blue highlight is on the lower channel display, channel tuning is for the PIP sub-picture.
This method of picture tuning is the same for one antenna input (ANT A only) and two antenna inputs (ANT A and
ANT B).
The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time.
You can watch a TV program while viewing other programs from the ANT A source or any of the video inputs.