Filter
Top Products
34
Black Side Panel
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode.
The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. The TV set will always return to “Set
Black Side Panel - OFF” setting every time the TV is powered “OFF”.
NOTE: To maximize operating life of the TV’s picture tubes when watching 4:3 signal, Black Side Panel is
cancelled at Power OFF. It is recommended to watch 4:3 signal with gray side bar.
Virtual HD
Use this feature to quickly change the scanning mode from 540p (progressive scanning) to 1080i (interlace
scanning).
When images from film are processed for broadcast to your home, picture noise or distortion can occur. Virtual
HD
TM
technology reduces this noise to a minimum, recreating the smooth curves and high fidelity image of the
original film source.
NOTE: VIRTUAL HD is not available (grayed out) in Digital Channels, 1080i input, HDMI and components.
Reset Video Settings
This function allows you to Reset the Video Menu
Settings of the present input and return it to the Day
VIDEO mode.
1. Use the CURSOR buttons
̆ or ̄ to highlight the
function to be adjusted.
2. Press the SELECT button to select RESET VIDEO
SETTINGS.
3. Use the CURSOR button
̄ to access other video
settings.
You can customize each of the Video Inputs to your
preference to increase viewing performance and
pleasure, depending upon the video program being
viewed. If RESET is selected, only the selected Input
will reset to the initial conditions as explained above.
If RESET is selected in Input 1, only Input 1
will return to factory conditions.
NOTE: 1. If YES and ALL MENU SETTINGS are selected, the VIDEO MENU SETTINGS will be reset to the
original factory settings on all modes during the next power on/off. However, if a CableCARD is
installed (see page 11) or the “Quick Start Up” (see page 55) is set to ON, the VIDEO MENU
SETTINGS will not reset and will be kept. In these two cases, please unplug the AC Power Cord to
reset all settings.
2. If YES is selected, the LOCKS settings or PARENTAL CONTROL feature will also reset.
Reset Video Settings
Video
Move
SEL Return
Select “Reset” to return the video menu settings
on this Input to the original factory settings.
Reset
Select “Yes” to fix the Video Menu Settings
to the original factory Settings on all modes.
No Yes
Reset Video Settings
Virtual HD
Black Side Panel
Aspect
Noise Reduction
Edge Enhancement
Black Enhancement
Color Temperature
Sharpness
Video
Move
SEL Return
50%
High
Middle
High
Off
Off
1080i
OR
Video
On-Screen Display