56
IMPORTANT POINTS:
(a) Do not attempt to perform this work by yourself.
(b) Request an installation specialist to install this unit.
(c) HITACHI assumes no responsibility or liability for injury/damage as a result of consumer installation and
handling. Be advised that improper consumer installation/handling is not covered by manufacturer’s warranty.
(d) This Projection Television weighs 205 pounds and has many sensitive components.
CAUTION: DISCONNECT UNIT FROM POWER SOURCE BEFORE DISASSEMBLY/ASSEMBLY
DISASSEMBLY PROCEDURE
NOTE: Read all instructions and understand how to properly and safely disassemble and assemble unit
STEP 1
Before disassembling this projection TV set, you
must first remove the speaker grille by grabbing the
sides and pulling left and right side see (a)(b).
Remove the front decoration panels by unscrewing
the 2 screws from each panel, see (c), then remove
from the original position, see (d)(e).
STEP 2
Remove 4 screws (³, ·, », ¿) that hold the
screen frame to the cabinet on the Right side, see
(a) and (b). Repeat to remove 4 screws on the Left
side.
STEP 3
Please remove 3 screws (³, ·, ») below screen
frame that hold the back cover to the cabinet as the
arrows shows, see (a).
Please remove 3 screws (¿, ´, ²) below screen
frame that hold the back cover to the cabinet as the
arrows shows, see (b).
57” Disassembly/Assembly Instructions
Useful Information
¿»·³
(a)
(a) (b)
(b)
(c)
(d)
(e)
¿
³ ·» ²´ ¿
(a) left side (b) right side