Filter
Top Products
CARE OF YOUR HITACHI PROJECTION TV AND VCRPlus+ REMOTE CONTROL - 34 -
FOLIOHG2
<IMG SRC="Obj100A.PCX">
Use the CURSOR
, to select a function. The function will be in yellow.
Use the CURSOR
, to change function. Your choice will be in red.
MTS MODE (Multi-Channel Television Sound) will allow you to select STEREO (a stereo broadcast), SAP
(second audio program) which may be a secondary language, weather report, etc. or MONO (monaural sound)
used when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you select will be displayed to the
left of the channel number. See example below for each selection when both stereo and second audio are
received (monaural is always received).
FOLIOHG2
<IMG SRC="Obj100B.PCX">
LOUDNESS
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a
separate stereo system.
CARE OF YOUR HITACHI PROJECTION TV AND VCRPlus+ REMOTE CONTROL
DO
Dust the screen and cabinet with a soft cloth.
Clean the screen with a soft cloth moistened with warm water. Dry with a soft cloth. (A mild soap may be used if
the screen is extremely dirty.)
Place your TV and remote control away from extreme heat, humidity and extremely dusty places.
Remove the plug from the wall outlet if your television will not be used for a long period of time, for instance, when
you go on vacation
DO NOT
Do not clean your screen or cabinet with strong cleaners, polishes or chemically treated cloth.
Do not place rubber or vinyl products or cellophane tape on your set.
Do not touch the screen too often.
Do not subject the remote control to shocks such as dropping it on the floor, etc. Physical damage to the precision
parts may result.
Avoid placing the remote control in a high humidity place or getting it wet. Don't leave it on or near a heater.