Hitachi 60SX12B/13K Projection Television User Manual


 
REAR PANEL JACKS
19
REAR PANEL JACKS
1 Antenna Input/Output
The remote control allows you to switch between two separate 75-Ohm RF antenna
inputs, ANT A and ANT B. ANT A input can be displayed as a Main Picture or Sub-
Picture. ANT B can only be displayed as a Main Picture. (ANT B cannot be displayed as
a PIP sub-picture.) The antenna output labeled "TO CONVERTER" allows the ANT A
connection to pass directly to a different source such as a cable box.
2 Audio/Video Inputs 1, 2
The "INPUT" button will step through each video source and antenna source input each
time it is pressed. Use the audio and video inputs to connect external devices, such as
VCR's, camcorders, laser disc players, etc. (If you have mono sound, insert the audio
cable into the left channel jack.)
3 Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
4 Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With
this connection, the audio to the stereo can be controlled by the televisions main
volume. Use these jacks for the SURROUND Left and Right channels. (See page 15.)
5 Transmitter Out
These jacks provide variable audio output to a set of wireless speakers. They can also
be used for another stereo system amplifier. With this connection, the audio can be
controlled by the televisions remote control.