Filter
Top Products
Rear Panel
(1) DIGITAL AUDIO OUT JACK
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to
an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder.
(2) MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
(3) VIDEO OUT JACK
• Use a video cable to connect one of the jack to the Video input on your television.
(4) S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
The S-Video must be selected in the VIDEO OUT SELECT.
(5) COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in the
VIDEO OUT SELECT.
(6) VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If the Y, Pb or Pr is selected, the S-Video may not work.
• If the S-Video is selected, the Y, Pb or Pr may not work.