Filter
Top Products
Basic Functions
Playing a Disc
Before Playback
• Turn on a TV and press the TV/VIDEO button to select video mode.
• Turn on your Audio System to select AUX, CD or DVD.
• Refer to your AUDIO User's Manual.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up:
If you want to select the language, press a NUMBER button. (This screen will only appear the very first time you plug in the
player.)
Playback
1
Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2 Place a disc gently into the tray with the disc's label facing up.
3 Press the PLAY/PAUSE button or OPEN/CLOSE button to close the disc tray.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up where
you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.)
NOTE
• If the player is left for an approximate 5 minutes in pause mode, it will stop.
• The power is automatically turned off after approximately 30 minutes have elapsed in the stop mode (auto power-off
feature).
• If the player is left in the stop mode for more than one minute without any user interaction, a screensaver will be activated,
and the TV screen will fade in and fade out repeatedly. Press PLAY button to resume normal play.
• This
icon indicates an invalid button press.
Several options are available during DVD playback.
1 Stopping Playback
Press the STOP button in playback.
2
Removing Disc
Press the OPEN/CLOSE button.
3 Pausing Playback
Press the PLAY/PAUSE or STEP button on the remote during playback.
• Screen stops, no sound.
• To resume again, press PLAY/PAUSE button once again.